8176 aluminum is an otherwise-unclassified alloy of aluminum. Cited properties are appropriate for the H24 temper. To achieve this temper, the metal is strain hardened, and the partially annealed, to a strength taht is roughly halfway between annealed (O) and full-hard (H28).8176 IS THE Aluminum Association (AA) designation for this material. In European standards, it will be given as EN AW-8176. AlFeSi is the EN chemical designation. Additionally, the UNS number is A98176.
| Product Name | 8176 Aluminum |
| Alloy | 8*** a category mianly used for lithium alloys. |
| Temper | H12,H14,H16,H18,H19 etc. |
| Thickness | 0.1mm to 10mm |
| Width | For coil: 600mm ~ 2000mm, or as customize |
| For sheet: 20mm ~ 2200mm, or as customize | |
| Weight/Coil | As the customer's request |
| MOQ | 3 ton |
| Delivery time | Aound 30 days |
| Payment terms | T/T L/C |
| Container | 20ft: 5898mm(L)*2352mm(W)*2393mm(H) Loading 18-25 tons 40ft:12032mm(L)*2352mm(W)*2393mm(H) Loading 25-27 tons |
| Packing | 3 layers of packing. Inside is craft paper, Middle is water plastic film and outside GI steel sheet to be covered by steel strips |
8176 aluminum is an otherwise-unclassified alloy of aluminum. Cited properties are appropriate for the H24 temper. To achieve this temper, the metal is strain hardened, and the partially annealed, to a strength taht is roughly halfway between annealed (O) and full-hard (H28).8176 IS THE Aluminum Association (AA) designation for this material. In European standards, it will be given as EN AW-8176. AlFeSi is the EN chemical designation. Additionally, the UNS number is A98176.
| Chemical Composition % | ||||||||||
| Si | Fe | Cu | Mn | Mg | Ga | Zr | Zn | Ti | Residuals | |
| 8176 | 0.03 -0.15 | 0,4-1.0 | / | / | / | ≤0.03 | / | ≤0.10 | / | ≤0.15 |
| Mechanical Properties | |||||
| Property | Value | ||||
| Tensile Strength | 160 MPa | ||||
| Yield Strength | 95 MPa | ||||
| Elongation | 15% | ||||
| Shear Strength | 70 MPa | ||||
Aluminum 8176 can be used in building wire and service cables.
A: We are a manufacturer, can do OEM and ODM.
A: Yes, we have small samples, like A4 size. You need to provide the grade (ALLOY NUMBER) and temper, thickness, width,length and the quantity.
A: Quality is priority. Our factory has gained SGS authentication. We guarantee the goods out form our factory 100% qualified. And each process, we have very strict operation and arrange 2 technicians to inspect. After the products are finished, we will make the last test to pick up the unqualified products.
A: Generally we accept 30% T/T as deposit and 70% against with B/L copy.
Please fill out the form below (required *), send us a short message, and we will contact you as soon as possible.
Copyright © 2022 Tianjin Century Changsheng Trade Co., Ltd
