2011 aluminum is a 2000-series aluminum alloy: the main alloying addition is copper, and it is formulated for primary forming into wrought products. 2011 is the Aluminum Association (AA) designation for this material. In European standards, it will be given as EN AW-2011.AlCuBiPb is the EN chemical designation. FC1 is the British Standard (BS) designation. A92011 is the UNS number. Additionally, the AFNOR(French) designation is A-u5PbBi.
| Product Name | 2011 Aluminum |
| Alloy | 2*** series are alloyed with copper and can be precipitation hardened to strengths compare to steel |
| Temper | T3,T4,T451 etc. |
| Thickness | 0.1mm to 10mm |
| Width | For coil: 600mm ~ 2000mm, or as customize |
| For sheet: 20mm ~ 2200mm, or as customize | |
| Weight/Coil | As the customer's request |
| MOQ | 3 ton |
| Delivery time | Aound 30 days |
| Payment terms | T/T L/C |
| Packing | 3 layers of packing. Inside is craft paper, Middle is water plastic film and outside GI steel sheet to be covered by steel strips |
2011 aluminum is a 2000-series aluminum alloy: the main alloying addition is copper, and it is formulated for primary forming into wrought products. 2011 is the Aluminum Association (AA) designation for this material. In European standards, it will be given as EN AW-2011.AlCuBiPb is the EN chemical designation. FC1 is the British Standard (BS) designation. A92011 is the UNS number. Additionally, the AFNOR(French) designation is A-u5PbBi.
| Chemical Composition % | ||||||||||
| Si | Fe | Cu | Bi | Mg | Zr | Cr | Zn | Ti | Residuals | |
| 2011 | ≤0.40 | ≤0.70 | 5.0-6.0 | 0.2-0.6 | / | / | / | ≤0.30 | / | ≤0.15 |
| Mechanical Properties | |
| Property | Value |
| Tensile Strength | 310-420 MPa |
| Yield Strength | 140-310 MPa |
| Elongation at Break | 8.5-18% |
| Shear Modulus | 27 GPa |
Aluminium 2011 alloy is held for 2 to 3 at 413℃ and then it is cooled in a controlled manner at rate of 10℃ per hour down to 260℃ and finally cooled in air.
Aluminum 2011 alloy can be cold worked by conventional methods. This alloy has free-machining capability. Optimum strength for this alloy can be achieved by an aging heat treatment after the cold working process.
Welding is not recommended for Aluminium 2011 alloy.
Aluminum 2011 alloy can be forged or hot worked between 288 and 482℃.
Conventional methods are used to form, bend and shape Aluminium 2011 alloy. The alloy is age hardened after being cold worked in order to improve its strength properties.
Aluminum 2011 alloy is age hardened at 510℃ for 3 hours and then water quenched.
A: We are a manufacturer, can do OEM and ODM.
A: Yes, we have small samples, like A4 size. You need to provide the grade (ALLOY NUMBER) and temper, thickness, width,length and the quantity.
A: Quality is priority. Our factory has gained SGS authentication. We guarantee the goods out form our factory 100% qualified. And each process, we have very strict operation and arrange 2 technicians to inspect. After the products are finished, we will make the last test to pick up the unqualified products.
A: Generally we accept 30% T/T as deposit and 70% against with B/L copy.
Please fill out the form below (required *), send us a short message, and we will contact you as soon as possible.
Copyright © 2022 Tianjin Century Changsheng Trade Co., Ltd
