6061 aluminum is a 6000-series aluminum alloy: there is significant alloying with both magnesium and silicon, and the alloy is formulated for primary forming into wrought products. 6061 is the Aluminum Association (AA) designation for this material. In European standards, it will be given as EN AW-6061. And A96061 is the UNS number.
| Product Name | 6061 Aluminum |
| Alloy | 6*** aluminum are alloyed with magnesium and silicon, are easy to machine and can be precipitation hardened that not to the high strength that 2000 and 7000 series can reach. |
| Temper | H12,H14,H16,H18,H19 etc. |
| Thickness | 0.1mm to 10mm |
| Width | For coil: 600mm ~ 2000mm, or as customize |
| For sheet: 20mm ~ 2200mm, or as customize | |
| Weight/Coil | As the customer's request |
| MOQ | 3 ton |
| Delivery time | Aound 30 days |
| Payment terms | T/T L/C |
| Container | 20ft: 5898mm(L)*2352mm(W)*2393mm(H) Loading 18-25 tons 40ft:12032mm(L)*2352mm(W)*2393mm(H) Loading 25-27 tons |
| Packing | 3 layers of packing. Inside is craft paper, Middle is water plastic film and outside GI steel sheet to be covered by steel strips |
6061 aluminum is a 6000-series aluminum alloy: there is significant alloying with both magnesium and silicon, and the alloy is formulated for primary forming into wrought products. 6061 is the Aluminum Association (AA) designation for this material. In European standards, it will be given as EN AW-6061. And A96061 is the UNS number.
| Chemical Composition % | ||||||||||
| Si | Fe | Cu | Mn | Mg | Cr | V | Zn | Ti | Residuals | |
| 6061 | 0.3-0.6 | 0.1-0.3 | ≤0.10 | ≤0.10 | 0.8-1.2 | 0.04-0.35 | / | ≤0.15 | ≤0.10 | ≤0.15 |
| Mechanical Properties | |||||
| Property | Value | ||||
| Tensile Strength | 130 to 410 MPa | ||||
| Yield Strength | 76 to 370 MPa | ||||
| Elongation | 3.4 to 20% | ||||
| Shear Strength | 84 to 210 MPa | ||||
|
AMS 4117 |
ASTM B247 |
ASTM B429 |
DIN 3.3211 |
MIL G-18014 |
QQ A-200/8 |
|
ASTM B209 |
ASTM B307 |
ASTM B483 |
MIL A-12545 |
MIL G-18015 |
QQ A-225/8 |
|
ASTM B210 |
ASTM B313 |
ASTM B547 |
MIL A-22771 |
MIL P-25995 |
QQ A-250/11 |
|
ASTM B211 |
ASTM B316 |
ASTM B548 |
MIL F-17132A |
MIL T-7081 |
QQ A-367 |
|
ASTM B221 |
ASTM B345 |
ASTM B632 |
MIL F-18280 |
MIL W-23351 |
QQ A-430 |
|
ASTM B234 |
ASTM B361 |
ASTM F467 |
MIL F-39000 |
MIL W-85 |
QQ WW-T-700/6 |
|
ASTM B241 |
ASTM B404 |
ASTM F468 |
MIL F-3922 |
QQ A-200/16 |
SAE J454 |
Aluminium / Aluminum 6061 alloy has good machinability in harder T 4 and T6 tempers. It can be machined in an annealed temper.
Aluminium / Aluminum 6061 alloy can be easily formed and worked in the annealed condition. The standard methods are used to perform bending, stamping, deep drawing, and spinning operations.
Aluminium / Aluminum 6061 alloy has excellent weldability. Thinner sections can be welded using the gas tungsten arc welding technique.
Aluminium / Aluminum 6061 alloy is forged at 233 to 483°C (750 to 900°F).
A: We are a manufacturer, can do OEM and ODM.
A: Yes, we have small samples, like A4 size. You need to provide the grade (ALLOY NUMBER) and temper, thickness, width,length and the quantity.
A: Quality is priority. Our factory has gained SGS authentication. We guarantee the goods out form our factory 100% qualified. And each process, we have very strict operation and arrange 2 technicians to inspect. After the products are finished, we will make the last test to pick up the unqualified products.
A: Generally we accept 30% T/T as deposit and 70% against with B/L copy.
Please fill out the form below (required *), send us a short message, and we will contact you as soon as possible.
Copyright © 2022 Tianjin Century Changsheng Trade Co., Ltd
