8011A aluminum is an otherwise-unclassified alloy of aluminum. 8011A is the Aluminum Association (AA) designation for this material. In European standards, it will be given as EN AW-8011A. AlFeSi (A) is the EN chemical designation.
| Product Name | 8011A Aluminum |
| Alloy | 8*** a category mianly used for lithium alloys. |
| Temper | H12,H14,H16,H18,H19 etc. |
| Thickness | 0.1mm to 10mm |
| Width | For coil: 600mm ~ 2000mm, or as customize |
| For sheet: 20mm ~ 2200mm, or as customize | |
| Weight/Coil | As the customer's request |
| MOQ | 3 ton |
| Delivery time | Aound 30 days |
| Payment terms | T/T L/C |
| Container | 20ft: 5898mm(L)*2352mm(W)*2393mm(H) Loading 18-25 tons 40ft:12032mm(L)*2352mm(W)*2393mm(H) Loading 25-27 tons |
| Packing | 3 layers of packing. Inside is craft paper, Middle is water plastic film and outside GI steel sheet to be covered by steel strips |
8011A aluminum is an otherwise-unclassified alloy of aluminum. 8011A is the Aluminum Association (AA) designation for this material. In European standards, it will be given as EN AW-8011A. AlFeSi (A) is the EN chemical designation.
| Chemical Composition % | ||||||||||
| Si | Fe | Cu | Mn | Mg | Cr | Zr | Zn | Ti | Residuals | |
| 8011A | 0.4-0.8 | 0,5-1.0 | ≤0.10 | ≤0.10 | ≤0.10 | ≤0.10 | / | ≤0.10 | ≤0.05 | ≤0.15 |
| Mechanical Properties | |||||
| Property | Value | ||||
| Tensile Strength | 100 to 180 MPa | ||||
| Yield Strength | 34 to 170 MPa | ||||
| Elongation | 1.7 to 28% | ||||
| Brinell Hardness | 25 to 50 | ||||
Aluminum 8011A can be used in shell casings, aircraft and may other structures.
A: We are a manufacturer, can do OEM and ODM.
A: Yes, we have small samples, like A4 size. You need to provide the grade (ALLOY NUMBER) and temper, thickness, width,length and the quantity.
A: Quality is priority. Our factory has gained SGS authentication. We guarantee the goods out form our factory 100% qualified. And each process, we have very strict operation and arrange 2 technicians to inspect. After the products are finished, we will make the last test to pick up the unqualified products.
A: Generally we accept 30% T/T as deposit and 70% against with B/L copy.
Please fill out the form below (required *), send us a short message, and we will contact you as soon as possible.
Copyright © 2022 Tianjin Century Changsheng Trade Co., Ltd
