3003 aluminum is a 3000-series aluminum alloy: the main alloying addition is manganese, and it is formulated for primary forming into wrought. 3003 is the Aluminum Association (AA) designation for this material. In European standards, it will be given as EN AW-3003. AlMn1Cu is the EN chemical designation. A93003 us the UNS number. Additionally, the AFNOR (French) designation is A-M1.
| Product Name | 3003 Aluminum |
| Alloy | 3*** aluminum are alloyed with manganese and can be hardened |
| Temper | H12,H14,H16,H18,H19 etc. |
| Thickness | 0.1mm to 10mm |
| Width | For coil: 600mm ~ 2000mm, or as customize |
| For sheet: 20mm ~ 2200mm, or as customize | |
| Weight/Coil | As the customer's request |
| MOQ | 3 ton |
| Delivery time | Aound 30 days |
| Payment terms | T/T L/C |
| Packing | 3 layers of packing. Inside is craft paper, Middle is water plastic film and outside GI steel sheet to be covered by steel strips |
3003 aluminum is a 3000-series aluminum alloy: the main alloying addition is manganese, and it is formulated for primary forming into wrought. 3003 is the Aluminum Association (AA) designation for this material. In European standards, it will be given as EN AW-3003. AlMn1Cu is the EN chemical designation. A93003 us the UNS number. Additionally, the AFNOR (French) designation is A-M1.
| Chemical Composition % | ||||||||||
| Si | Fe | Cu | Mn | Mg | Zr | Cr | Zn | Ti | Residuals | |
| 3003 | ≤0.6 | ≤0.7 | 0.05-0.2 | 1.0-1.5 | / | / | / | / | / | ≤0.15 |
| Mechanical Properties | |||||
| Property | Value | ||||
| Tensile Strength | 110 to 240 MPa | ||||
| Yield Strength | 40 to 210 MPa | ||||
| Elongation | 1.1 to 28% | ||||
| Shear strength | 68 to 130 MPa | ||||
The Aluminum 3003 alloy has good machinability characteristics.
The Aluminum 3003 alloy can be formed using conventional hot working or cold working method.
The Aluminum 3003 alloy has good weld-ability.
The Aluminum 3003 alloy can be forged at 260 to 510 ℃.
The Aluminum 3003 alloy is annealed at 413 ℃.
A: We are a manufacturer, can do OEM and ODM.
A: Yes, we have small samples, like A4 size. You need to provide the grade (ALLOY NUMBER) and temper, thickness, width,length and the quantity.
A: Quality is priority. Our factory has gained SGS authentication. We guarantee the goods out form our factory 100% qualified. And each process, we have very strict operation and arrange 2 technicians to inspect. After the products are finished, we will make the last test to pick up the unqualified products.
A: Generally we accept 30% T/T as deposit and 70% against with B/L copy.
Please fill out the form below (required *), send us a short message, and we will contact you as soon as possible.
Copyright © 2022 Tianjin Century Changsheng Trade Co., Ltd
