5657 aluminum is a 5000-series aluminum alloy: the main alloying addition is magnesium and it is formulated for primary forming into wrought products. 5657 is the Aluminum Association (AA) designation for this material. In European standards, it will be given as EN AW-5657. A95657 is the UNS number. Additionally, the EN chemical designation is Al99.85Mg1(A).
| Product Name | 5657 Aluminum |
| Alloy | 5*** aluminum are alloyed with magnesium and derive most of their strength from work-hardening. |
| Temper | H12,H14,H16,H18,H19 etc. |
| Thickness | 0.1mm to 10mm |
| Width | For coil: 600mm ~ 2000mm, or as customize |
| For sheet: 20mm ~ 2200mm, or as customize | |
| Weight/Coil | As the customer's request |
| MOQ | 3 ton |
| Delivery time | Aound 30 days |
| Payment terms | T/T L/C |
| Container | 20ft: 5898mm(L)*2352mm(W)*2393mm(H) Loading 18-25 tons 40ft:12032mm(L)*2352mm(W)*2393mm(H) Loading 25-27 tons |
| Packing | 3 layers of packing. Inside is craft paper, Middle is water plastic film and outside GI steel sheet to be covered by steel strips |
5657 aluminum is a 5000-series aluminum alloy: the main alloying addition is magnesium and it is formulated for primary forming into wrought products. 5657 is the Aluminum Association (AA) designation for this material. In European standards, it will be given as EN AW-5657. A95657 is the UNS number. Additionally, the EN chemical designation is Al99.85Mg1(A).
| Chemical Composition % | ||||||||||
| Si | Fe | Cu | Mn | Mg | Ga | V | Zn | Ti | Residuals | |
| 5657 | ≤0.08 | ≤0.10 | ≤0.10 | ≤0.03 | 0.6-1.0 | ≤0.03 | ≤0.05 | ≤0.05 | / | ≤0.05 |
| Mechanical Properties | |||||
| Property | Value | ||||
| Tensile Strength | 150 to 200 MPa | ||||
| Yield Strength | 140 to 170 MPa | ||||
| Elongation | 6.6 to 15% | ||||
| Shear Strength | 92 to 110 MPa | ||||
Annealing is mainly performed to obtain O temper using a cold worked material. The process is carried out at 413°C (775°F) and air cooled. A stress-relief anneal can also be performed at 238°C (460°F) for 3 hours followed by air cooling.
Aluminium / Aluminum 5657 alloy is suited for cold working by commercial methods when in the soft temper state. Although possible, it is more difficult in harder tempers.
Aluminium / Aluminum 5657 alloy can be welded using the conventional methods. The widely used methods are resistance welding, arc, and gas torch. It is suitable to use AL 5457, AL 5056, or AL5052 as filler metal. This alloy can also be joined by brazing; however, this requires special processes and trial evaluation.
Both hot and cold forming is easy to perform with Aluminium / Aluminum 5657 alloy using the conventional methods. However, in the harder temper, cold working is quite difficult.
A: We are a manufacturer, can do OEM and ODM.
A: Yes, we have small samples, like A4 size. You need to provide the grade (ALLOY NUMBER) and temper, thickness, width,length and the quantity.
A: Quality is priority. Our factory has gained SGS authentication. We guarantee the goods out form our factory 100% qualified. And each process, we have very strict operation and arrange 2 technicians to inspect. After the products are finished, we will make the last test to pick up the unqualified products.
A: Generally we accept 30% T/T as deposit and 70% against with B/L copy.
Please fill out the form below (required *), send us a short message, and we will contact you as soon as possible.
Copyright © 2022 Tianjin Century Changsheng Trade Co., Ltd
