3105 aluminum is a 3000-series aluminum alloy: the main alloying addition is manganese, and it is formulated for primary forming into wrought products. 3105 is the Aluminum Association (AA) designation for this material. In European standards, it will we be given as EN AW-3105. AlMn1Mg1Cu is the EN chemical designation. Additionally, the UNS number is A93105.
| Product Name | 3105 Aluminum |
| Alloy | 3*** aluminum are alloyed with manganese and can be hardened |
| Temper | H12,H14,H16,H18,H19 etc. |
| Thickness | 0.1mm to 10mm |
| Width | For coil: 600mm ~ 2000mm, or as customize |
| For sheet: 20mm ~ 2200mm, or as customize | |
| Weight/Coil | As the customer's request |
| MOQ | 3 ton |
| Delivery time | Aound 30 days |
| Payment terms | T/T L/C |
| Packing | 3 layers of packing. Inside is craft paper, Middle is water plastic film and outside GI steel sheet to be covered by steel strips |
3105 aluminum is a 3000-series aluminum alloy: the main alloying addition is manganese, and it is formulated for primary forming into wrought products. 3105 is the Aluminum Association (AA) designation for this material. In European standards, it will we be given as EN AW-3105. AlMn1Mg1Cu is the EN chemical designation. Additionally, the UNS number is A93105.
| Chemical Composition % | ||||||||||
| Si | Fe | Cu | Mn | Mg | Cr | Ga | Zn | Ti | Residuals | |
| 3105 | ≤0.60 | ≤0.70 | ≤0.30 | 0.3-0.8 | 0.2-0.8 | ≤0.20 | / | ≤0.40 | ≤0.10 | ≤0.15 |
| Mechanical Properties | |||||
| Property | Value | ||||
| Tensile Strength | 120 to 240 MPa | ||||
| Yield Strength | 40 to 220 MPa | ||||
| Elongation | 1.1 to 20% | ||||
| Shear strength | 77 to 140 MPa | ||||
Aluminum 3105 alloy has average machinability. However, its machinability can be increased in harder tempers than in annealed condition. Oil lubricant are used for machining this alloy.
Aluminum 3105 alloy has good forming characteristics. It is suggested that bend radii should be used in one thickness to 2t range for annealed H12,H14 and H16 tempers. Bend radii of 2 to 7 t should be used for the H18 temper.
Aluminum 3105 alloy has good weldability. It can be welded using arc welding method.
Aluminium 3105 alloy does not react to heat treatment expect during cold working.
A: We are a manufacturer, can do OEM and ODM.
A: Yes, we have small samples, like A4 size. You need to provide the grade (ALLOY NUMBER) and temper, thickness, width,length and the quantity.
A: Quality is priority. Our factory has gained SGS authentication. We guarantee the goods out form our factory 100% qualified. And each process, we have very strict operation and arrange 2 technicians to inspect. After the products are finished, we will make the last test to pick up the unqualified products.
A: Generally we accept 30% T/T as deposit and 70% against with B/L copy.
Please fill out the form below (required *), send us a short message, and we will contact you as soon as possible.
Copyright © 2022 Tianjin Century Changsheng Trade Co., Ltd
