5052 aluminum is a 5000-series aluminum alloy: the main alloying addition is magnesium, and it is formulated for primary forming into wrought products. 5052 is the Aluminum Association(AA) designation for this material. In European standards, it will be given as EN AW-5052. A95052 is the UNS number. Additionally, the EN chemical designation is AlMg2.5. And the AFNOR (French) designation is A-G2.5C.
| Product Name | 5052 Aluminum |
| Alloy | 5*** aluminum are alloyed with magnesium and derive most of their stregth from work-hardening. |
| Temper | H12,H14,H16,H18,H19 etc. |
| Thickness | 0.1mm to 10mm |
| Width | For coil: 600mm ~ 2000mm, or as customize |
| For sheet: 20mm ~ 2200mm, or as customize | |
| Weight/Coil | As the customer's request |
| MOQ | 3 ton |
| Delivery time | Aound 30 days |
| Payment terms | T/T L/C |
| Container | 20ft: 5898mm(L)*2352mm(W)*2393mm(H) Loading 18-25 tons 40ft:12032mm(L)*2352mm(W)*2393mm(H) Loading 25-27 tons |
| Packing | 3 layers of packing. Inside is craft paper, Middle is water plastic film and outside GI steel sheet to be covered by steel strips |
5052 aluminum is a 5000-series aluminum alloy: the main alloying addition is magnesium, and it is formulated for primary forming into wrought products. 5052 is the Aluminum Association(AA) designation for this material. In European standards, it will be given as EN AW-5052. A95052 is the UNS number. Additionally, the EN chemical designation is AlMg2.5. And the AFNOR (French) designation is A-G2.5C.
| Chemical Composition % | ||||||||||
| Si | Fe | Cu | Mn | Mg | Ni | Cr | Zn | Ti | Residuals | |
| 5052 | ≤0.25 | ≤0.40 | ≤0.10 | ≤0.10 | 2.2-2.8 | / | 0.15-0.35 | ≤0.10 | / | ≤0.15 |
| Mechanical Properties | |||||
| Property | Value | ||||
| Tensile Strength | 190 to 320 MPa | ||||
| Yield Strength | 75 to 280 MPa | ||||
| Elongation | 1.1 to 22% | ||||
| Shear Strength | 120 to 180 MPa | ||||
The machinability of Aluminum 5052 alloy is rated as fair. This alloy can be easily machined in hard temper than in annealed form, and the quality of finish is better. Other than in very light cuts, all other machining should be done using oil lubricants.
Alumium 5052 alloy can be easily formed at room temperature. However, consecutive cold working tends to reduce the alloy’s formaiblity.
Welding can be easlily performed on Aluminum 5052 alloy is using conventional methods. In case a filler rod is needed, it should be Aluminum 5356 alloy as filler. The most suitable welding methods are tungsten or consumable ekestrode inert gas shielded arc welding.
Aluminum 5052 alloy can be hardened by cold working only.
A: We are a manufacturer, can do OEM and ODM.
A: Yes, we have small samples, like A4 size. You need to provide the grade (ALLOY NUMBER) and temper, thickness, width,length and the quantity.
A: Quality is priority. Our factory has gained SGS authentication. We guarantee the goods out form our factory 100% qualified. And each process, we have very strict operation and arrange 2 technicians to inspect. After the products are finished, we will make the last test to pick up the unqualified products.
A: Generally we accept 30% T/T as deposit and 70% against with B/L copy.
Please fill out the form below (required *), send us a short message, and we will contact you as soon as possible.
Copyright © 2022 Tianjin Century Changsheng Trade Co., Ltd
