4006 aluminum is a wrought alloy product which offers superior service in both low and high-temperature. The addition of silicon increase the strength of the alloy at the expense of overall ductility. The addition of nickel reduces thermal expansion while increasing mechanical strength, although susceptibility to corrosive pitting is possible. 4006 offers the gighest tensile strength of all aluminum alloys in 4000 series.
| Product Name | 4006 Aluminum |
| Alloy | 4*** aluminum are alloyed with silicaon. These are also know as silumin |
| Temper | H12,H14,H16,H18,H19 etc. |
| Thickness | 0.1mm to 10mm |
| Width | For coil: 600mm ~ 2000mm, or as customize |
| For sheet: 20mm ~ 2200mm, or as customize | |
| Weight/Coil | As the customer's request |
| MOQ | 3 ton |
| Delivery time | Aound 30 days |
| Payment terms | T/T L/C |
| Container | 20ft: 5898mm(L)*2352mm(W)*2393mm(H) Loading 18-25 tons 40ft:12032mm(L)*2352mm(W)*2393mm(H) Loading 25-27 tons |
| Packing | 3 layers of packing. Inside is craft paper, Middle is water plastic film and outside GI steel sheet to be covered by steel strips |
4006 aluminum is a wrought alloy product which offers superior service in both low and high-temperature. The addition of silicon increase the strength of the alloy at the expense of overall ductility. The addition of nickel reduces thermal expansion while increasing mechanical strength, although susceptibility to corrosive pitting is possible. 4006 offers the gighest tensile strength of all aluminum alloys in 4000 series.
| Chemical Composition % | ||||||||||
| Si | Fe | Cu | Mn | Mg | Ni | Cr | Zn | Ti | Residuals | |
| 4006 | 0.8-1.2 | 0.5-0.8 | ≤0.20 | ≤0.05 | ≤0.01 | 0.5-1.3 | / | ≤0.05 | / | ≤0.15 |
| Mechanical Properties | |||||
| Property | Value | ||||
| Tensile Strength | 110-160 MPa | ||||
| Yield Strength | 62 to 140 MPa | ||||
| Elongation | 3.4-24% | ||||
| Shear Strength | 70 to 91 MPa | ||||
1.Alloy 4006 aluminum with excellent enameling and good strength
2.Excellent reflectivity, good for polishing
3.Excellent pearl color anodizing
4.Well-Protected Packing
A: We are a manufacturer, can do OEM and ODM.
A: Yes, we have small samples, like A4 size. You need to provide the grade (ALLOY NUMBER) and temper, thickness, width,length and the quantity.
A: Quality is priority. Our factory has gained SGS authentication. We guarantee the goods out form our factory 100% qualified. And each process, we have very strict operation and arrange 2 technicians to inspect. After the products are finished, we will make the last test to pick up the unqualified products.
A: Generally we accept 30% T/T as deposit and 70% against with B/L copy.
Please fill out the form below (required *), send us a short message, and we will contact you as soon as possible.
Copyright © 2022 Tianjin Century Changsheng Trade Co., Ltd
